500gsm PVC Banner

INPUT TOTAL SQM AND WE WILL BE IN CONTACT TO DISCUSS YOUR DESIRED WIDTH AND HEIGHT.

ORDERS OVER 99SQM IN TOTAL WILL NEED TO BE QUOTED PLEASE EMAIL [email protected]

Material Overview

• Premium quality, coated banner-grade PVC
• Suitable for tension-frame systems
• M1/B1 fire-rated to comply with UK and European fire safety standards
• Suitable for both indoor and outdoor use
• High-quality full-colour print
• Standard finishing included
• Printed with fade-proof UV-based inks

Each banner is printed and finished to your requirements.

Uses for 500gsm PVC

• Most suited for tension-frame systems
• Suitable for both indoor and outdoor use

Finishes Available for 500gsm PVC

Below are the standard finishes available for this material. There are no additional charges for these finishes.

Hems & Eyelets

Banners will be given a welded hem, then eyeletted at equal distributions along the hem.

The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that’s no problem at all – simply let us know what you need when you place your order.

There is no charge for this finish.

Hems Only

Banners will be given a 53mm welded hem.

There is no charge for this finish.

Trimmed to Size

Banners will be cut to the size ordered.

There is no charge for this finish.

Trimmed with Eyelets

Same as Trimmed to Size but with the addition of eyelets.

Pole Pockets

A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.

The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.